Product No : PPL150W
Product Description
PPL series are high performance programmable DC electronic load. Four basic functions and nine basic operation modes provides sufficient solutions wherever power sources need to be tested. Especially unique CPV and CPC modes greatly improved the functionality of constant power operation. The strong List Mode function, with Min. step 10ms and Max. step 99999s, allows users to set numbers of cycles at free and to link to other lists, facilitating complicated tests.
★ 4 basic functions: CC, CV, CR, CP
★ 9 basic operation modes: CCL, CCH, CVL, CVH, CRL, CRM, CRH, CPV, CPC
★ 24-bit A/D converter and 16-bit D/A converter, 40kHz D/A conversion speed
★ Hardware circuit for CR function, faster transient response and higher CR accuracy
★ High speed transient test function, max. test frequency 2kHz
★ 4.3-inch backlit Segment LCD display
★ Auto ON/OFF function
★ List Mode function, step 10ms-99999s, free to set numbers of cycles and to be linked to other lists
★ Auxiliary functions: short circuit test, battery discharge capacity test
★ Save & recall function for frequently used setups
★ Standard RS-232 interface, support SCPI commands, support Labview
★ Optional RS-232 to USB cable
| Model | PPL-8611C2 | |
| Rated input (0℃~40℃) | ||
| Voltage | 0~150V | |
| Current | 1mA~30A | |
| Power *1 | 150W | |
| MOV@FS current | 1.5V | |
| Constant voltage mode (CV) | ||
| Low range | 0.1~30V | |
| Resolution | 1mV | |
| Accuracy | ±(0.05%+0.02%FS) | |
| High range | 0.10~150V | |
| Resolution | 10mV | |
| Accuracy | ±(0.05%+0.025%FS) | |
| Constant current mode (CC) | ||
| Low range | 0~3A | |
| Resolution | 1mA | |
| Accuracy | ±(0.1%+0.1%FS) | |
| High range | 0~30A | |
| Resolution | 10mA | |
| Accuracy | ±(0.1%+0.15%FS) | |
| Constant resistance mode (CR) (Input voltage /current≥10%FS) | ||
| Low range (VH CRL) | ≈0.06～6Ω | |
| Resolution | 100uΩ | |
| Accuracy (Impedance) | ±(0.5%+0.5%FS) | |
| Middle range (VH CRM) | ≈6～600Ω | |
| Resolution | 2.7us | |
| Accuracy (Conductance) | ±(1%+1%FS) | |
| High range (VH CRH) | ≈60～4000Ω | |
| Resolution *2 | 0.30us | |
| Accuracy (Conductance) | ±(1.5%+1.5%FS) | |
| Low range (VL CRL) | ≈0.06～1.12Ω | |
| Resolution | 18uΩ | |
| Accuracy (Impedance) | ±(0.5%+0.5%FS) | |
| Medium range (VL CRM) | ≈1.12～112Ω | |
| Resolution | 15us | |
| Accuracy (Conductance) | ±(1%+1%FS) | |
| High range (VL CRH) | ≈11.2～2000Ω | |
| Resolution | 1.6us | |
| Accuracy (Conductance) | ±(1.5%+1.5%FS) | |
| Constant power mode (CP) (Input voltage /current≥10%FS) | ||
| Range | 0~150W | |
| Resolution | P<100W | 1mW |
| P≥100W | 10mW | |
| Accuracy | ±(1%+0.1%FS) | |
| Voltage measurement | ||
| Low range | 0~30V | |
| Resolution | 1mV | |
| Accuracy | ±(0.05%+0.02%FS) | |
| High range | 0~150V | |
| Resolution | 10mV | |
| Accuracy | ±(0.05%+0.025%FS) | |
| Current measurement | ||
| Low range | 0~3A | |
| Resolution | 1mA | |
| Accuracy | ±(0.1%+0.1%FS) | |
| High range | 0~30A | |
| Resolution | 1mA | |
| Accuracy | ±(0.1%+0.15%FS) | |
| Power measurement (Input voltage /current≥10%FS) | ||
| Range | 0~150W | |
| Resolution | P<100W | 1mW |
| P≥100W | 10mW | |
| Accuracy | 1%+0.1%FS | |
| Current slew rate | ||
| Range | CCH ( /us) | 0.1mA ~1.5A |
| CCL ( /us)*3 | 0.1mA ~0.15A | |
| Resolution | 0.1mA/us | |
| Accuracy *4 | 3%+10us | |
| Battery discharge | ||
| Discharge time | 1s~100h | |
| Resolution | 1s | |
| Accuracy | 0.2%+1s | |
| Battery capacity | 3000Ah | |
| Resolution | 1mAh | |
| Accuracy | 0.3%+0.01Ah | |
| Discharge voltage range | 0.1V~150V | |
| Discharge current resolution | 10mA | |
| Short circuit | ||
| CCL | 3.6A | |
| CCH | 33A | |
| CV | 0V | |
| VH CRL | 0.044Ω | |
| VH CRM | 5.6Ω | |
| VH CRH | 58Ω | |
| VL CRL | 0.044Ω | |
| VL CRM | 1.1Ω | |
| VL CRH | 10Ω | |
| CPV | 165W | |
| CPC | 0W | |
| Max. slew rate | ||
| Current | 1.5A /us | |
| Voltage | 0.2V /us | |
| Open circuit | ≥20kΩ | |
| Max. input level | ||
| Current | 33A | |
| Voltage | 175V | |
| Ripple & Noise | ||
| Current (rms/p-p) | 3mA/30mA | |
| Voltage (rms) | 5mV | |
| Transient operation | ||
| Transient mode | Continuous, Pulse, Toggled | |
| Frequency range *5 | 0.01Hz~2kHz | |
| High/Low time | 0~99999ms | |
| Resolution | 250us | |
| Accuracy | 0.2%+10us | |
| Rising/Falling time | 250us~99999ms | |
| Resolution | 250us | |
| Accuracy | 0.2%+10us | |
| List Mode | ||
| Step time | 10ms~99999s | |
| Resolution | 10ms | |
| Accuracy | 0.2℅+10us | |
| No. of steps | 1~50 | |
| No. of cycles | 0~65535 | |
| Storage | 8 Lists | |
| Expanded function | Chain | |
| Trigger input | ||
| Trigger level | TTL falling edge | |
| Trigger pulse width | ≥20us | |
| General | ||
| Protection | Over current, over voltage, over power, over temperature and reverse voltage protections | |
| Interface | RS-232 interface, support SCPI commands, support Labview | |
| Optional RS-232 to USB cable | ||
| Operating environment | 0℃~40℃, ≤85%RH | |
| Storage environment | -10℃~70℃, ≤70%RH | |
| Power source | AC110V/220V±10% selectable, 50/60Hz | |
| Accessories | Power cord x1, Operation manual x1, RS-232 cable x1 | |
| Dimension (WxHxD) | 215x89x412mm | |
| Weight | 5.2kg | |
Order info:
| Programmable Electronic DC Load | |||
| Model | Rated input | Dimension | Weight |
| PPL-8611C2 | 150W 150V 30A | 215x89x412mm | 5.2kg |
| PPL-8612C2 | 300W 150V 30A | 215x89x412mm | 6.7kg |
| PPL-8612C3 | 300W 150V 60A | 215x89x412mm | 6.7kg |
| PPL-8612B1 | 300W 500V 15A | 215x89x412mm | 6.7kg |
| PPL-8613C3 | 600W 150V 60A | 215x89x507mm | 9kg |
| PPL-8613B2 | 600W 500V 30A | 215x89x507mm | 9kg |
Reviews
There are no reviews yet.